1. Dmg To Usb On Windows
  2. Dmg To Iso
  3. Hackintosh Sierra Zone Dmg To Usb Drive
  4. Hackintosh Sierra Zone Dmg To Usb Drive

A distro of High Sierra Zone by Hackintosh Zone (10.13) was released with AMD Processor support including Ryzen CPUs. MacOS Mojave (ten.14) Clover was updated to support Mojave with revision 4514. UniBeast also received Mojave back up for Intel-based machines. A distro of Hackintosh Mojave by Hackintosh Zone (10.14) was released. Kick Into Hackintosh Sierra Zone. Restart your Hackintosh, and plug in your Hackintosh Sierra Zone USB bulldoze. Press the central to change boot device (F8 / F1 / F10); the key varies with motherboard If things become well, your computer will boot from the USB drive instead of booting from your normal hard disk.

This is my working install guide for macOS sierra 10.12 on HP elitebook 840 G1, i5(4300U), Intel HD 4400 (tested on both azerty/querty & 1600x900 / 1366x768 models)

  1. Download macOS Sierra from hackintoshzone.com
  2. Download transmac trial
  3. Plug your USB drive into your calculator, and open TransMac equally Administrator
  4. Correct click on your USB (sidebar at the right) and format deejay for mac.
  5. Subsequently finishing right click again on your USB and click Restore with deejay image
  6. Choose the file Hackintosh-Sierra-Zone.dmg you downloaded and proceed.
  7. Await until finish then reboot to your bios.

Dmg To Usb On Windows

  1. Reset bios settings to default
  2. Go to Avant-garde
    • Device configutation
      • Check Fn key switch
      • Modify Video retentivity to 512
      • Disable wake on USB
    • Built in device selection
      • Disable wake on LAN
  3. Verify if VT-D; VT-X are disabled and kick mode on UEFI (native recommended merely no windows boot).
  4. Save and reboot.
  1. Boot using your USB bulldoze (F9)
  2. Select your USB drive, named as "Hackintosh Sierra Zone"
  3. Wait until texts and apple tree logo disappear
  4. Click next, next, continue, concord
  5. Go to meridian menu and click utilities->disk utility
  6. Click on your hard bulldoze disk (non the partition), correct click so erase
  7. A popup will testify up, cull these:
    • Name : macOS (or what you want)
    • Format : Mac Os Extended (journaled)
    • Scheme : GUID Partition Map
  8. Then Erase. After end close the window.
  9. Select your drive "macOS" then customize. Choose these right settings:
    • Kicking-loader -> Clover -> cheque all the 3 (standard, EFI, UEFI)
    • Graphics -> check Graphics Enabler
    • Drivers -> check all
      • FakeSMC Plugins -> bank check all
    • Chipset kexts
      • Check Fixed chipset kexts
      • Chipset driver
    • Bank check Null*********
    • Laptop drivers
      • Check all (battery per centum & Trackpad ….)
    • Sierra USB Fixes (bank check these)
      • USB 3.0
      • USB Inject All
    • FakePCIID Kexts (check these)
      • USB 2.0/3.0
      • Intel Ethernet
      • Intel Hd graphics
      • Intel HDMI audio
      • Broadcom wifi
    • Bone X Fixes
      • Check all
    • Click accept at the bottom
  10. Continue
  11. The install process will have upwardly to xxx minutes

1. Boot from hard bulldoze

  1. Download and run Hackintosh Vietnam Tool
  2. Click go along, continue, continue, hold.
  3. Bank check Clover -> Install Clover UEFI.
  4. Continue, install and washed.
  5. remove your bootable USB bulldoze. now you're able to boot from difficult bulldoze.

two.1 Kexts installation

  1. Run over again Hackintosh Vietnam Tool
  2. Choose these right settings:
    • Kexts -> Organisation (check these)
      • FakeSMC v6
      • FakeSMC v6 plugins
      • Patch AppleRTC
    • Kexts -> Graphics (check these)
      • ACPIBacklight
      • FakePCIID Hd 4600
    • Kexts -> Drive (cheque these)
      • AHCIPortInjector
      • Trim Support (just if your drive is SSD)
    • Kexts -> USB 3.0 -> GenericUSBXHCI
    • Fixes
      • Enable NoATime
      • Home/End keys
      • Hibernate -> Disable hibernate
    • Tools
      • IASL
      • Kext Wizard
      • MacIASL
  3. And then click proceed -> install.

Hackintosh sierra zone.dmg

two.2 Kexts installation

  1. Download these essential kexts
  2. Open Kext Wizard & select Installation tab
  3. Scan and add downloaded kexts or simply drag them to the window.
  4. Check Fill-in Kexts then click Install.
  5. Expect a minute and it's washed.

3. Patch DSDT files

You lot volition find the complete guide here. there is also a dandy video tutorial but I'm only noting the main steps here beneath. Warframe griner dmg vs dmg.

Dmg To Iso

Hackintosh zone sierra download

  1. Reboot your Hackintosh and go to Clover menu.
  2. Printing F4 cardinal. Nothing will be shown at this bespeak but this will excerpt original ACPI files so we can patch them. you'll detect them in EFI/Clover/ACPI/origin.
  3. re-create the origin folder to the desktop and rename it to patched. A fill-in is recommended.
  4. Delete duplicate SSDT files if at that place are. they have aforementioned sizes and you can decide them by bash command ls -50 SSDT*.aml.
  5. Download iasl to disassemble .aml files to .dsl files. copy the downloaded file to /usr/bin to accept ease access in terminal:
  1. Download the file refs.txt nowadays in this repo and place it to the patched directory.
  2. To practise and then, run this control : iasl -da -dl -fe refs.txt DSDT.aml SSDT*.aml
  3. Open up MaciASL. go to preferences > sources > add :
    • name : RehabMan Laptop
    • url : http://raw.github.com/RehabMan/Laptop-DSDT-Patch/master
  4. Go to your patched binder and open DSDT.dsl file. it shoud be opened with MaciASL.
  5. click Patch icon in the top.
  6. at present we will apply each patch described below to the DSDT file. you demand to select the patch name (the left tree bar) and click patch then compile, it should exist compiled without whatsoever errors (warnings aren't importants).
    • RehabMan Laptop
      • [audio] audio layout 12
      • [bat] HP ProBook 4x0s G1
      • [igpu] Haswell HD4400/HD4600/HD5000
      • [sys] IRQ fix
      • [sys] SMBUS Set
  7. Once finishing get to File menu->save, and so over again File->relieve equally-> DSDT.aml (file format: ACPI Machine Language Binary)
  8. For SSDT files you demand just to compile files without errors. (open dsl file, compile, relieve, salvage as .aml) and washed.
  9. now mount your EFI partition, and go to EFI->CLOVER->ACPI->patched and paste all the compiled .aml files.
  10. close and reboot. everything should work now.

Hackintosh Sierra Zone Dmg To Usb Drive

4. Getting Wi-Fi carte du jour working

Hackintosh Sierra Zone Dmg To Usb Bulldoze

  1. I ordered this one afterward enquiry and it works correct out of the box.
  2. Later installation mount your EFI partition and open your config.plist with clover configurator and become to SMBIOS department and change information technology to MacBook Air 5,ii. save and reboot. now It should work.